Ecor Pro DH2500 INOX front DH2500-INOX_Back_Right_Angle_View DH2500-INOX_Left_Side_View DH2500-INOX_Top_View

Picture of Ecor Pro DH2500 INOX 35L Commercial Desiccant Dehumidifier

Ecor Pro DH2500 INOX front DH2500-INOX_Back_Right_Angle_View DH2500-INOX_Left_Side_View DH2500-INOX_Top_View
ECOR PRO

Ecor Pro DH2500 INOX 35L Commercial Desiccant Dehumidifier

SKU: CC-02-003-0005

FREE DUCTING OFFER ON THIS UNIT.

Industrial and leisure desiccant dehumidifier for private customers as well as the flood and water damage professional, temporary humidity control professionals, museums, research laboratories and dry air storage.

Back

£1929.00

In stock
FREE DUCTING OFFER
Ecor Pro DH2500 INOX front Ecor Pro DH2500 INOX 35L Commercial Desiccant Dehumidifier £1929.00

Detailed Description

 

FREE DUCTING OFFER ON THIS UNIT UNTIL THE END OF NOVEMBER

Included in the offer..

1x - EPDUCT125x3 (3m x 125mm Flex Duct- Black Professional Nylon) and 1x - EPDUCT85x3 (3m x 85mm Flex Duct- Black Professional Nylon)

Overview

Very small for its 35 litre capacity. Will dry 24/7 and dry in temperatures even down to -20°C. Can work up to 35°C. Perfect for any climate. Chemical & salt resistant for cleaning and anti corrosion.

 

Can be carried by one person and transported easily with the carrying handle. No water container to empty. Instead the water is expelled via a 80mm air duct to the outside (standard size). Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively Ecor Pro’s Unique DH2500 Low Temperature.

Designed in the UK as a unit fit for professional purpose. The DH2500 Ecor Pro is a 3 Hole desiccant dehumidifier and was even built for use in the hire industry.

Many configurations if installed. Input process air is dust filtered & dried. Input air can be ducted in with a 125mm duct (5″ inches). Wet exhaust air can be ducted out via a 80mm duct.

Ecor Pro’s research shows that the DH2500 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers.

Click the below link to access Ecor Pro's carbon calculator:

A Tree is Planted or Saved for Every Unit Sold - Ecor Pro Dehumidifiers (ecor-pro.com)

Features & Benefits

  • Highly Compact – Small 35 litre dehumidifier in the market.
  • Dust Filter – Simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
  • Easy Repair – Easy to remove cover for maintenance and eventual repair. Easy access to replace cord sets or warn parts via qualified persons. Prolonging the lifetime of the DH2500 INOX dehumidifier. Cord sets can be replaced in around 20 minutes.
  • On Four Feet – Anti scratch plastic feet.
  • Carrying Handle – Easy to carry by one person. The removable handles also protect the dehumidifier duct flanges if in transit.
  • Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.
  • Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.
  • Wet Air Exhaust – The DH2500 INOX has one internal fan compared to two in the DH3500 INOX. Both do not produce water. Work in colder temperatures via vented away moisture. Moisture purged from the system by 15% of the process air. Dried with small negative pressure.
  • “Three Hole System” – One inlet and two outlets. Used as a four hole industrial dehumidifier via slight duct configuration and accurate duct flow measurement.  DH3500 INOX an easier alternative if concerned.
  • Power Supply – 220V supply 50Hz industrial dehumidifier.
  • Auto Reset – If there is an interruption to the power supply, the DH2500 INOX will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
  • All Metal Construction – All metal with epoxy paint finish heat treated for strength inside & outside. Designed for longevity.
  • 5m / 15′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Please contact us if you require further information or advice.

Technical Specification

Length (mm)
445
Width (mm)
352
Height (mm)
345
Weight (kg)
17.5
Input Power (w)
900
Water Tank Volume (L)
35
Extraction Method
Extraction Hose
Humidistat
Built in
Installation Type
Universal
Voltage
110v
Warranty
2 Years
Extraction Rate (L/24hr)
35
Noise Level
56
Type
Desiccant

Document Download

Documentation File Format Size

Manual PDF 4.4 MB

What's In The Box

Related products

Need some help?