Dantherm ACT 7 7kW Mobile Air Conditioning Unit £4254.00 Detailed Description
Whether the requirement is to cool down a retail space, marquee, warehouse or even an office where the existing air-conditioning system has broken down, the ACT 7 will get the job done. With its robust and lightweight build, it is ideally suited to withstand the wear and tear characterising the rental market. (See also CC-01-002-0133 hex 7000)
Whole-room cooling
In contrast to most air-cooled units, the ACT 7 will provide whole-room cooling without the need to continually exhaust internal air.
In addition, the unit does not require mounting of an exhaust air duct to an outside wall. Getting the ACT 7 up and running is simply a matter of connecting the cooling line connectors to the outdoor heat rejection unit.
How it works
The ACT 7 absorbs the heat into a refrigerant cooling system. From there, the heat is transferred to the self-containing chilled water/glycol system. It is then pumped through to the outdoor unit where the water is cooled and the heat dissipates.
The indoor unit is connected to the outdoor unit via two 22mm quick-connect, self-sealing flexible hoses. These hoses are supplied in 5m or 15m lengths and can be connected to a maximum length of 30m.
Control panel
Cooling mode switch
Select either ‘recirculation’ or ‘air-conditioning’ mode. In ‘air-conditioning’ mode, the electronic thermostat automatically controls the room temperature at the cooling set point from 8°C to 35°C.
LCD display panel
Shows the actual and set point temperature, operation modes and equipment status including any alarms. The cooling set point can be adjusted using the display.
Fan speed control dial
Step-less adjustment of air flow for maximum comfort.
Features & Benefits
- Sturdy metal construction
- High-efficiency cooling circuit
- Can be installed without prior training
- Quick-connect cooling line connectors
- Indoor unit with step-less variable fan speed and adjustable grille
- Up to 30 meter installation distance between indoor and outdoor units
- Slim water and glycol hose connection eliminates need for large air ducts
- 5 or 15 meter connection hoses (max total of 30 meters per unit)
- T-split for connection of two outdoor units to one indoor unit for extended operational range ≥ 40°C
- Duct spigot kit
- Forklift guides
Operating range – inside temperature
°C
8-35
Operating range – outside temperature
°C
0-35
Air flow internal (step-less variable)
m3/h
930 -1,310
Fuse
A
13
Nominal running current
A
11.0
Nominal power consumption
kW
2.5
Cooling capacity
kW
7.0
Please contact us if you require further information or advice.
Technical Specification
What's In The Box
Related products
In stockThe ACT 7 mobile water-cooled air-conditioner can deliver efficient cooling in a matter of minutes with no cooling knowledge or special training required to install the unit. When in need of temporary small-scale cooling, an efficient and easily implemented solution is required.
In stockAccessory for ACT 7 Outdoor heat rejection unit.
In stockDantherm mobile CDT Condensation dehumidifiers offer quick and easy control for water damage restoration companies and the construction industry.
In stockThe Dantherm CDT 30S refrigerant dehumidifier is designed for professional use in the building or damage restoration sectors. It has a high pressure fan and two x Ø100 mm air ducts that allow you to connect flexible ducting to the dehumidifier (max length 5m)
In stockThe CDT 40 is a robust, cost-effective and energy-efficient, reliable mobile dehumidifier. It works in accordance with the condensation principle. CDT 40 is Fitted with a 1kW heating element, a high pressure fan, two duct spigots, allowing connection of two, flexible air ducts Ø100, each up to 5m long.
In stockThe Dantherm CDT 40S refrigerant dehumidifier is designed for professional use in the building or damage restoration sectors. It has a high pressure fan and two x Ø100 mm air ducts that allow you to connect flexible ducting to the dehumidifier (max length 5m). Cost-effective, energy-efficient and user-friendly dehumidifiers for water damage restoration and drying of buildings.
In stockThe Dantherm CDT 60 dehumidifier is ideal for water damage restoration, drying buildings, protecting from steam condensation and more. It uses the natural process of condensation to remove excess moisture from the air and the surface areas of walls and floors.
